Intel MB440LX manual Installing a 5.25-inch Peripheral Device

3

1

2

OM05789

Figure 4-18. Installing a 5.25-inch Peripheral Device

1Tape drive or other device

2Power cable

3SCSI signal cable

11.Replace the snap-in plastic peripheral bay cover, top cover, and both side covers.

12.This step is optional. If you installed a SCSI CD-ROM drive, run the Symbios SCSI utility to enable BIOS support for a bootable CD-ROM. Run the SCU or Setup to specify that the CD-ROM is the boot device. For information about running these utilities, see Chapter 3, “Configuring The System.”

110 Chapter 4 Working Inside Your System