Intel MB440LX manual Installing Video Drivers, Installing Scsi Drivers

Installing Video Drivers

After you have configured the system, you can install various video drivers to take full advantage of its onboard, integrated Cirrus Logic CL-GD54M40 super VGA video controller’s enhanced features. The system may not operate properly without these video drivers installed.

For the most current information on which video drivers you need, read the README.TXT file on the Display Drivers and DOS Utilities diskette. To install drivers from the diskettes, follow the installation instructions in the README.TXT file.

The video drivers are on the Configuration Software CD. For instructions on creating Video diskettes, see Chapter 2, “Installing The System.”

To install these video drivers, do this:

1.Fully configure the system. (This may include adding video DRAM buffer memory, application software, or new ISA or PCI add-in boards.)

2.Insert disk 1 of the video drivers and utilities for MS-DOS and Windows† into drive A.

3.At the DOS command prompt, type A:install and press <Enter>.

4.Follow the directions on the monitor to install the video drivers.

If the system does not operate as described in this chapter, follow the instructions in Chapter 10, “Solving Problems.”

Installing SCSI Drivers

The SCSI drivers are on the Configuration Software CD. For instructions on creating SCSI diskettes, see Chapter 2, “Installing The System.” To install the SCSI drivers, follow the instructions in the README.TXT file on the first diskette.

M440LX Server System Product Guide 77