Intel MB440LX manual Installing the Power Share Backplane, 129

Installing the Power Share Backplane

See Figures 4-26 and 4-27.

1.Observe the warnings and cautions on page 3, “Safety Guidelines.”

2.Remove the right side cover (page 80).

3.Position the mounting holes in the power share backplane over the snap-in standoffs and threaded standoffs on the inside chassis wall.

4.Push the backplane toward the chassis wall until it snaps onto the snap-in standoffs.

5.Insert the screws through the mounting holes in the backplane and into the threaded stand-offs on the inside chassis wall; tighten the screws firmly (6.0 inch-pounds).

6.Replace the power supplies.

7.Connect the power and signal cables to the power share backplane.

8.Replace the side cover (page 80).

M440LX Server System Product Guide 129