Intel MB440LX manual Replacing the Snap-in Plastic Peripheral Bay Cover

Replacing the Snap-in Plastic Peripheral Bay Cover

See Figure 4-4.

1.Insert the rigid tabs on the plastic snap-in peripheral bay cover into the notches along the inside edge of the plastic front panel.

2.Push the top right corner of the plastic cover toward the chassis with an inward twisting motion to insert the top flexible tab in the slot above the 3.5-inch diskette drive.

3.Gently press on the cover until both the top and bottom flexible tabs snap into place.

4.Replace the right side cover (page 81).

5.Connect all external cables and power cords to the system. (Some systems have more than one power cord.)

M440LX Server System Product Guide 87