Jenn-Air W10491278A manual Installation Instructions, Unpacking, Location Requirements

Models: W10491278A

1 20
Download 20 pages 18.89 Kb
Page 5
Image 5

INSTALLATION INSTRUCTIONS

Unpacking

1.Empty the microwave oven of any packing materials.

2.Clean the inside with a soft, damp cloth.

3.Check for damage, such as:

a door that is not lined up correctly

damage around the door, or

dents on the interior or exterior of the microwave oven.

If there is any damage, do not operate the microwave oven until a designated service technician has checked it and made any needed repairs.

NOTE: To avoid damage to the microwave oven, do not remove microwave inlet cover. See “Parts and Features.”

Location Requirements

WARNING

Excessive Weight Hazard

Use two or more people to move and install microwave oven.

Failure to do so can result in back or other injury.

IMPORTANT: The control side of the microwave oven is the heavy side. Handle the microwave oven gently. The weight of the microwave oven is over 35 lbs (15.9 kg).

Place the microwave oven on a cart, counter, table or shelf that is strong enough to hold the microwave oven and the food and utensils you place inside it.

The microwave oven should be at a temperature above 50°F (10°C) for proper operation.

NOTE: Some models can be built into a wall or cabinet by using one of the trim kits listed in the “Assistance or Service” section.

Do not block the exhaust vents or air intake openings. Allow a few inches of space at the back and side of the microwave oven where the exhaust vents are located. Blocking the exhaust vents could cause damage to the microwave oven, as well as poor cooking results.

Make sure the microwave oven legs are in place to ensure proper airflow. If vents are blocked, a sensitive thermal device may automatically turn the microwave oven off. The microwave oven should work properly once it has cooled.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

SAVE THESE INSTRUCTIONS

5

Page 5
Image 5
Jenn-Air W10491278A manual Installation Instructions, Unpacking, Location Requirements, Electrical Requirements

W10491278A specifications

The Jenn-Air W10491278A is a premium appliance designed to elevate your cooking experience with its advanced technologies and sleek design. Known for its innovative features, this product is ideal for home chefs seeking convenience, efficiency, and superior performance in the kitchen.

One of the main characteristics of the Jenn-Air W10491278A is its exceptional versatility. This appliance typically incorporates various cooking modes, allowing users to bake, broil, and roast with ease. The intuitive controls make it simple to select the desired cooking method, ensuring perfect results every time. Whether you are preparing a family meal or hosting a dinner party, this appliance adapts to your culinary needs, providing reliable and consistent performance.

Another standout feature is its advanced temperature management system. With precise temperature control, the Jenn-Air W10491278A ensures that your food cooks evenly and thoroughly. This is particularly beneficial for complex dishes that require careful attention to temperature, allowing you to achieve restaurant-quality results in the comfort of your home.

The design of the Jenn-Air W10491278A is both stylish and functional. With a sleek, modern aesthetic, it seamlessly fits into any kitchen decor. Its high-quality stainless steel finish is not only visually appealing but also resistant to fingerprints and smudges, making it easy to maintain and clean.

In addition to its cooking capabilities, the Jenn-Air W10491278A often includes smart technology features. This allows for connectivity with mobile devices, enabling remote operation and monitoring. Users can adjust settings, preheat the appliance, or receive notifications when meals are ready, all from the convenience of their smartphones.

Another notable aspect of this appliance is its energy efficiency. Jenn-Air has engineered the W10491278A to consume less energy while maintaining optimal performance, which is both environmentally friendly and cost-effective in the long run.

Overall, the Jenn-Air W10491278A combines innovative cooking technology, stylish design, and energy efficiency to create a premium kitchen appliance. Its user-friendly features and adaptability make it an excellent choice for anyone looking to enhance their culinary skills and enjoy a more efficient cooking process. Whether you are an aspiring chef or simply love preparing meals for loved ones, the Jenn-Air W10491278A is designed to meet and exceed your expectations.