Teac HD-1 owner manual Setting the Alarm Time, Setting the Clock Time and Calendar

Models: HD-1

1 20
Download 20 pages 37.18 Kb
Page 16
Image 16
Setting the Clock Time and Calendar

Setting the Clock Time and Calendar

Clock ADJ

1Press and hold the Clock ADJ Button located on the top of the unit until 12H or 24H appeared. Select your desired clock display either 12 hour or 24 hour by turning TUNING / SELECT Knob (or press . or/ on the remote control). Then press the Clock ADJ Button again to confirm 12H or 24H mode setting.

2The hour display at the center will blink. Turn the TUNING / SELECT Knob (or press . or/ on the remote control) to set the current time, then press the Clock ADJ Button again to confirm clock setting. (Note: if the system is set to 12-hour mode, the AM or PM indicator will be lighted on.) The minute display will now blink. Follow the same procedure to set the minute.

3The month, date and year display at the lower will blink successively. or turn TUNING /SELECT Knob (or press . or/ on the remote control) until current month, date, year is displayed. Press the Clock ADJ Button to confirm month, date or year setting.

16

Setting the Alarm Time

1The unit can set two Alarm Times.

2Press and hold the ALARM 1 or ALARM 2 Button until the display blinks. Press the FUNCTION/WAKE TO Button to select mode of HD RADIO FM, HD RADIO AM, IPOD or BUZZER to wake to, then press ALARM 1 or ALARM 2 Button to confirm.

1

Setting the Alarm Time 2

Alam indicator ( Manual background or Manual background ) appears on the display

3The Hour display will blink, turn TUNING /SELECT Knob (or press or Button on the remote control) to select, press ALARM 1 or ALARM 2 Button to confirm.

4The Minute display will blink, turn TUNING /SELECT Knob (or press or Button on the remote control) to select, press ALARM 1 or ALARM 2 Button to confirm.

5The Volume level display will blink, turn VOLUME DOWN or VOLUME UP Knob to select, press ALARM 1 or ALARM 2 Button to confirm.

6The Alarm 1 or Alarm 2 icon will light up on display.

If the source is set to "iPod", but when iPod is not setting, the unit will turn on into buzzer mode.

When the source is set to "TUNER"and the unit turns on, it will tune in to the station you selected last time.

NOTE :

Once you set the alarm time, the alarm will be automatically armed. The Alarm icon will appear to indicate the alarm is armed. Make sure to adjust volume level for comfortable wake up volume.

HD-1.indd 16

2008.12.17 9:19:48 AM

Page 16
Image 16
Teac HD-1 owner manual Setting the Alarm Time, Setting the Clock Time and Calendar