Using the Alarm
ALARM 1
ALARM 2
1Set the alarm time per Setting Alarm time. To preview the alarm time, just press the ALARM 1 button or ALARM 2 button to turn on the Alarm function.
2Press the ALARM 1 button or ALARM 2 button again to arm or disarm the alarm.
1
2
3When the alarm is sounding, press the *STANDBY/ON button to turn the Alarm OFF. The alarm will come on again the next day at the same time.
*: SLEEP
*: iPod/iPhone connecting
*: Press the ALARM 1 button
*: Press the ALARM 2 button
4To stop the alarm from coming on the following day, press the ALARM 1 button or ALARM 2 button to turn it OFF. The Alarm Icon will disappear to indicate the alarm is disarmed.
•If the alarm is not turned off after it sounds it will play for approximately 1 hour then turn off automatically. This cycle will repeat every 24 hours unless the controls are changed.
NOTE :
•When setting the unit to “Wake to iPod,” Your iPod must be properly docked and turned off or the alarm will not sound.
•When you select “Wake To iPod,” be sure your iPod has enough songs to play for 1 hour, otherwise set the iPod repeat mode to ON. If there is no iPod is present or there is no music on your iPod at alarm time, the
•Alarm function is still working at the Standby ON mode.
•Playback volume will gradually increase up to your set volume when the unit is turned on by Alarm.
Snooze/Dimmer Operation
DIMMER function
You can change the front panel’s display brightness. Use the DIMMER button to change the brightness among 4 levels.
You can change display brightness by using DIMMEN botton. | ENGLISH |
|
How to use the snooze function
After the ON time is reached, press the SNOOZE button and the unit will turn off for 6 minutes then turn on again.
You can use this function repeatedly during 1 hour alarm cycle.
17
2008.12.17 9:19:51 AM
