Teac HD-1 owner manual LINE Out Operation, Device, English

Listening to a non-docking iPod or other portable audio devices

If you are using your iPod without a docking port, other MP3 player or other portable audio device, it can still be played on the HD-1.

1Connect the PHONES jack (audio output jack) of a portable audio player to the AUX IN jack of the HD-1 using the supplied stereo mini plug cable.

2Select "AUX" using the FUNCTION/WAKE TO button.

4 2

FUNCTION (WAKE TO)

3Turn on and play your device.

4Turn the VOLUME knob on the unit (or press Volume+/- buttons on the remote control) to adjust the system volume. You may need to adjust your device volume, too.

When using the PHONES jack of your mini player, you must adjust the volume of the mini player or you may hear no sound from your HD-1.

•Turning the volume of the mini player up too high may cause the sound from your HD-1 to be distorted. In this case, reduce the volume of the mini player until the distortion stops and then adjust the volume level of the HD-1 to a comfortable listening level.

LINE Out Operation

You can connect the HD-1 to another line-level device such as an amplifier or recording device through the LINE OUT Jack located at the back of the unit.

DEVICE

The volume setting on the HD-1 does not affect the line level. Adjust volume level using the volume control on the device you connect to.

ENGLISH

15

HD-1.indd 15

2008.12.17 9:19:46 AM