Teac HD-1 Getting started, Power Source, Protect your Furniture, Compatible iPod Software

Getting started

The HD-1comes mounted with an adapter for iPod with “iPod classic(160G)+iPhone 2G/3G”. To play your iPod through the HD-1, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below.

1Remove the adapter from the Dock of the HD-1.

Hold the left and right sides of the adapter and gently pull it up.

2This unit includes dock adapters as follows: “nano” for iPod nano 1st and 2nd generations.

“60GB (color) + Photo 40GB/60GB” for iPod with Click Wheel (40 GB), iPod with color display.

“20GB + U2” for iPod with Click Wheel (20 GB, U2 Special Edition).

iPod classic (160G) + iPhone 2G/3G ( Premounted )

<Use a commercially available adapter or a supplied one with your iPod to play other iPods.

3Insert the adapter into the Dock of the HD-1.

Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight “click” is heard indicating the adapter is inserted correctly.

1

2

10

Power Source

•This HD Radio Receiver operates from AC120V/60Hz line power supply.

•The Remote Control operates on 1 Lithium battery, CR2032 (Included).

Insert the AC plug into a standard 120V AC outlet . The Radio will automatically go into standby mode.

NOTE :

The system has an AC plug and will only fit into matching AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, you should have the outlet changed by a qualified, licensed electrician. Do not use an adapter to make the plug fit into your outlet. This defeats the safety feature and could expose you to electric shock.

Protect your Furniture

This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture.

Compatible iPod Software

In case your iPod will not work with the HD-1or with the remote control unit, software update may solve the problem.

Visit the Apple website and download the latest iPod Software.

http://www.apple.com/uk/ipod/download/

“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

HD-1.indd 10

2008.12.17 9:19:27 AM