18
ERROR MESSAGE & POSSIBLE SOLUTION
NO SIGNAL
1. Check that the signal-cable is properly connected , If the conn ector is loose, tighten the connector’s screws.
2. Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORT
Your computer has been set to unsuitable display mode ,set the c omputer to
display mode given in the following table.
SPECIFICATIONS
Driving system
TFT Color LCD
LCD Panel Size 55.8cm(22")
Pixel Pitch 0.282mm(H) × 0.282mm(V)
R,G,B Analog Interface
Video Digital Interface