16
OFF mode. This reduces the monitor's internal power supply consumption. Af ter the video input signal is restored, full power is restore d and
the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except th e display is completely off. The display
is restored by pressing a key on the keyboard, or clicking the mou se.
TECHNICAL SUPPORT (FAQ)
Problem & Question Possible Solution
Power LED is not on *Check if the Power Switch is in the ON
position
*Power Cord should be connected
No Plug & Play *Check if the PC system is Plug & Play
compatible
*Check if th e Video Card is Plug & Play
compatible
*Check if the D-15 plug pin of Video
Cable is bent
Picture is fuzzy *Adjust the Contrast and Brig htness
Controls.
Picture bounces or a wave
pattern is present in the picture *Move electrical devices that may cause
electrical interference.