Installation and Connection Instructions
1Safety Information for the Installation
•Only transport the dishwasher in an upright position, otherwise salt water may run out.
•Before using the dishwasher for the first time, check for any damage caused in transport. Do not under any circumstances connect an ap- pliance that is damaged. In the case of damage, please contact your supplier.
•Never use the dishwasher if the mains cable, water inlet or drain hose are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible.
•Always plug the mains plug into a correctly installed shockproof socket.
•Permanent connection: a permanent connection must only be in- stalled by a trained electrician.
•Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the sup- ply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.
•
•The dishwasher’s cable must only be replaced by a Service Force Engi- neer.
•A water inlet hose with safety valve must only be replaced by a Serv- ice Force Engineer.
•This appliance is heavy.
Care should be taken when moving it.
32
