Manuals / John Lewis / Kitchen Appliance / Dishwasher

John Lewis JLDWS1202 instruction manual Setting the Amount of Rinse Aid Required

Models: JLDWS1202

1 40

Download 40 pages 36.25 Kb

Page 12

Setting the Amount of Rinse Aid Required

Setting the Amount of Rinse Aid Required

3 Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfac- tory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in the factory.

1.Open the dishwasher door.

2.Press the release button on the rinse

aid compartment.

3. Open the cover.

4.Set the dosage level.

5. Press the lid shut until it clicks into place.

6. If rinse aid has leaked out, wipe it away with a cloth.

Activating/Deactivating the Rinse Aid dispenser

If the 3 in1 button is pressed, you do not need to deactivate the rinse aid dispenser.

1.Press the ON/OFF button.

3 If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds. The LED indicators of all the buttons that can be selected will illumi- nate.

Exception: The 3in1 button will only illuminate if the function has been activated.

2.Press function buttons 2 and 3 simultaneously and hold them down. The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 2.

The LED indicator for function button 2 will flash. The multi-display will indicate the current setting:

0d	Rinse aid dispenser is deactivated
1d	Rinse aid dispenser is activated (factory setting)

12

Image 12

John Lewis JLDWS1202 Setting the Amount of Rinse Aid Required, Activating/Deactivating the Rinse Aid dispenser

Contents

JLDWS1202 The following symbols are used in the text Dear CustomerContents Installation and Connection Instructions1Safety Prior to using for the first timeChild Safety Operating InstructionsGeneral Safety Diagram of Appliance Control PanelThe multi-display can indicate Prior to Using for the First Time Setting the Water SoftenerSetting manually Setting electronically3.Press function button Adding Dishwasher Salt Filling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/Deactivating the Rinse Aid dispenserActivating/Deactivating the Acoustic Signal In Daily Use Loading Cutlery and DishesLoading cutlery Cups, Glasses, Coffee Service Pots, Pans, Large PlatesSpikes folded away: More room for serving dishes Adjusting the Height of the Upper Basket Raising/Lowering the Upper Bas- ketMaximum height of dishes in the Upper basketAdding Detergent Using 3in1 Detergents Concentrated detergentsDetergent tablets Selecting the Dishwashing Cycle Cycle Table DishwashingSuitable Type ofInterrupting or Cancelling a Dishwashing Cycle Cancelling the dishwashing cycleStarting a Dishwashing Cycle Setting the Delay Timer Cancelling the time delayTo change the time delay To change a dishwashing cycleCare and Cleaning Switching Off the DishwasherRemoving the Dishes Cleaning the Filters What to do if Remedying Small MalfunctionsMalfunction Possible causeRemedy 2 short warning tonesIf the Dishwashing Results are not Satisfactory The dishes are still dirtyThe dishes do not dry and are not shining Glass corrosionTechnical Data Disposal2 Packaging material 2 Old applianceNotes for Test Institutes Sample loading arrangementsLower basket with cutlery basket Cutlery basketInstallation and Connection Instructions 1Safety Information for the InstallationInstalling the Dishwasher Free-standingappliances Connecting the Dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressureWater drainage Anti-floodsystemDrain hose Extension hosesElectrical Connection Changing a fuse1 WARNING - This appliance must be earthed Green and Yellow: Earth Blue:Neutral Brown:LiveConnecting systems watermains cable cableService and Spare Parts 0870 01Subject to change without notice 822 612