John Lewis JLDWS1202 instruction manual Malfunction Possible cause Remedy Short warning tones

Malfunction	Possible cause	Remedy
2 short warning tones	The sink spigot connection	Clean the sink spigot outlet.
continuously repeated can	is blocked.
be heard.
The cycle indicator for the
selected dishwashing cycle	Water drain hose
is flashing,		Check the position of the
fault code Å 20 is dis-	has not been correctly posi-
played in the multi-dis-	tioned.	hose.
play. (Problems with water
outflow)
3 short warning tones
continuously repeated can	The anti-flood system has	First shut off the water tap,
be heard,		then switch off the appli-
Fault code Å 30 is dis-	been triggered.	ance and contact your local
played in the multi-dis-		Service Force Centre.
play.
	The mains plug is not	Plug in mains plug.
	plugged in.
	A fuse in the house’s wiring	Replace fuse.
The cycle is not starting.	system is defective.
	For dishwasher models with	If the dishes are to be
	a delay start timer:	washed immediately, cancel
	A start time has been se-
		the delay start.
	lected.
	The dishwashing compart-
	ment is made from rust-
	free stainless steel. Rust
	spots in the dishwashing
Rust spots are visible in	compartment are due to	Only wash cutlery, dishes
	rust particles from external
the dishwashing compart-		and pans that are suitable
ment.	sources (rust particles from	for dishwasher use.
	water pipes, pans, cutlery,
	etc.). Remove such spots
	with a commercially-avail-
	able cleaning product for
	stainless steel.
		Decalcify appliance with
		commercially available
A whistling noise can be		agents for cleaning dish-
	The whistling is not a cause	washers.
heard when washing dish-		If the noises can still be
es.	for concern.	heard after decalcifying the
		machine, use a different
		brand of detergent for
		washing cutlery and dishes.

27