GE PD968, PD900 installation instructions Standard Installation Preparation

Installation Instructions

B

Standard Installation Preparation

Standard Installation

	Wall
		Flat
		Area
		R
1/4” Min.
Flat
23-3/16”	25” Typically	1/4”
9/16” Min.	9/16” Min.
Flat	Flat	Range Support

29-15/16”– 30-1/16”

Smooth Cut

Countertop

The Standard Installation of this Drop-In Range is to hang by the countertop on the side metal flanges under glass cooktop.

This Range must not be installed on a base or sub structure (2”x 4” support).

If the construction of your cabinet cannot provide a 1/4” flat area at the back of the countertop opening, consider changing the countertop to accommodate this dimension. If the area is not flat, excess tension may be applied to the glass cooktop, causing breakage and voiding the warranty.

	Braces secured between the
	underside of the countertop and
	the cabinet if required to obtain
	1-1/4”minimum thickness (two
	sides)
	Center the 30” wide opening over the ad-
B1
	jacent cabinets and mark with a straight
	edge.
	Using a straight edge, mark the back line at
B2
	23-3/16” from the front edge of the counter.
	Be careful not to damage the adjacent
B3
	cabinets while cutting the countertop.
	Remove countertop raised edge, if
B4
	incorporated. (See illustration on page 4)

5