![](/images/new-backgrounds/1184023/18402367x1.webp)
System configuration example
Notes on system configuration
Turn off the power supply of each system component before connecting any of the components. Read the instruction manual for each system component before connecting it.
If the necessary cables for connecting any system components are not supplied with the component or available as an option, you may need to fashion a cable to suit the component concerned.
If there is a lot of jitter in the video signal input from the video source, the picture on the screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).
The projector can be connected to video signal sources which out put VIDEO,
The projector has
It may not be possible to connect some types of computer.
Example of connection to audio-visual equipment
Audio system | Laser disc player | VCR |
Computer for control use
Connector panel at left side of projector
NOTE:
If the
Only one audio signal input system is available for the AUDIO IN
If the video signal source is connected using a cable with a BNC junction plug, use the BNC/RCA adapter to convert the pin jack.
If an audio system is connected to the AUDIO OUT terminal, the sound volume balance and muting can be controlled by the remote control unit which is supplied with the projector. However, if the volume is set to “0”, no audio signal will be output from the AUDIO OUT terminal.
33