Changing the Network Configuration

Use the Network Configuration menu to set the bootup option, configure the switch’s Internet Protocol (IP) parameters, enable the on-board Web server, or to set the number of concurrent Telnet sessions allowed. The screen shown below is described in the following table.

Vertical Horizon Local Management -- VH-8G

Network Configuration

IP Configuration ...

IP Connectivity Test (Ping) ...

HTTP Configuration ...

MAX Number of allowed Telnet sessions (1 -4) : 4

Physical Address : 00-E0-29-52-28-00

 

 

<APPLY>

<OK>

<CANCEL>

 

Use <TAB> or arrow keys to move. <Enter> to select.

 

 

 

 

 

 

Figure 2-7. Network Configuration

 

 

 

 

 

Parameter

Description

 

 

 

IP Configuration

Screen used to set the bootup option, or configure the switch’s IP

 

 

parameters.

 

 

 

IP Connectivity Test

Screen used to test IP connectivity to a (Ping) specified device.

HTTP Configuration

Screen used to enable the Web server.

MAX Number of

The maximum number of Telnet sessions allowed to

Allowed Telnet

simultaneously access the switch.

Sessions

 

 

 

 

Physical Address

MAC address of the switch.

 

 

9033640

VH-8G User Interface 13

Page 21
Image 21
Enterasys Networks VH-8G manual Changing the Network Configuration