Enterasys Networks VH-8G manual 802.1Q Vlan Static Table Configuration

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an existing VLAN. You can add/delete port members for a VLAN, or prevent a port from being automatically added to a VLAN via the GVRP protocol. (Also, note that all ports can only belong to one untagged VLAN. This is set to VLAN 1 by default, but can be changed via the Port Assignment VLAN Configuration screen on page 51.)

		Vertical Horizon Local Management -- VH-8G
		1Q VLAN Static Table Configuration
		VID	VLAN Name	Status
		--------------------------------------
		1		Active
	Egress Ports		Forbidden Egress Ports
		11111111	00000000
	Untagged Ports
		11111111	VID : 1
			[Show]
			[More]
			[New]
		<APPLY>	<OK>	<CANCEL>
	Use <TAB> or arrow keys to move, other keys to make changes.
			<Enter> to select.
	Figure 2-38. 802.1Q VLAN Static Table Configuration
Parameter		Description
VID		The ID for the VLAN currently displayed.
		Range: 1-2048
VLAN Name		A user-specified symbolic name for this VLAN.
		String length: Up to 8 alphanumeric characters
Status		Sets the current editing status for this VLAN as:
		Not in Service, Destroy, or Active.
Egress Ports		Set the entry for any port in this field to “1” to add it to the
		displayed VLAN, or “0” to remove it from the VLAN.
Forbidden Egress		Prevents a port from being automatically added to this VLAN via
Ports		GVRP.
Untagged Ports		Set the entry for any port in this field to “1” to add it to the
		displayed VLAN as an untagged port.
[Show]		Displays settings for the specified VLAN.
[More]		Displays consecutively numbered VLANs.
[New]		Sets up the screen for configuring a new VLAN.

9033640 VH-8G User Interface 49