![](/images/new-backgrounds/1286175/28617519x1.webp)
Operation
QUICK OPERATION GUIDE
Pan and Tilt | Move the joystick or press the direction keys left/right and up/down. | |
Zoom Far | To zoom far: |
|
| 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom limit. | |
| 2. Release the button or joystick for one second. | |
| 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the picture you want | |
| or reach the digital zoom* limit. | |
Zoom Wide | Press the Zoom Wide button or turn the joystick counterclockwise. | |
Scanning |
|
|
| Stop Scan | Preset 96 |
| Random Scan | Preset 97 |
| Frame Scan | Preset 98 |
| Auto Scan | Preset 99 |
Presets | Refer to the documentation supplied with THE control system. | |
Patterns† | Refer to the documentation supplied with the control system. | |
Zones | Refer to Zones on page 40 and to the documentation supplied with the control system. | |
Alarms | Refer to Alarms on page 44. | |
Auto Flip | Turn on or off in the camera menu. Refer to Auto Flip on page 29. |
QUICK CONFIGURATION GUIDE
1.Configure preset 95 to access the main menu (refer to Preset 95: Accessing Main Menu on page 11).
2.Use the joystick to position the cursor beside menu selection.
NOTE: If your controller does not have a joystick, use the up or down key.
3.Press Iris Open, the submenu/cursor moves to the right.
4.Move the joystick up or down to view selections.
5.Press Iris Open to make a selection.
6.Press Iris Close to cancel a selection.
*Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the greater the reduction in resolution.
†The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.
10 |