![](/images/new-backgrounds/1286175/28617571x1.webp)
Use the following steps to configure a preset.
1.Select the preset number:
a.Use the joystick to position the cursor beside PRESET NUMBER. Press Iris Open. The cursor moves to the right.
b.Move the joystick up or down to view selections. Press Iris Open to enter selection.
2.Edit the preset label:
a.Use the joystick to position the cursor beside EDIT PRESET LABEL.
b.Press Iris Open. The following informations appears:
LABEL FOR PRESET
PRESET NUMBER ------
1234567890 | OK |
ABCDEFGHIJ | CANCEL |
KLMNOPQRST |
|
| BACKSPACE |
abcdefghij | SPACE |
klmnopqrst |
|
uvwxyz*;: |
|
c.Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.
d.When label is completed, move the cursor to OK. Press Iris Open to return to the Preset menu.
3.Edit the preset scene:
a.Use the joystick to position the cursor beside EDIT PRESET SCENE.
b.Press Iris Open.
c.Follow the directions displayed on the monitor.
4.Edit preset camera settings:
a.Use the joystick to position the cursor beside EDIT CAMERA SETTINGS.
b.Press Iris Open. The EDIT CAMERA SETTINGS window appears. Refer to Camera on page 23 and Advanced Camera Settings on page 26 to change preset camera settings.
c.To edit the camera settings schedule, use the joystick to position the cursor beside EDIT SCHEDULE. Press Iris Open.
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.
NOTES:
•There are two additional options available for the IR cut filter that are only available when configuring a preset. The additional settings are IN and OUT. If the IR cut filter is set to IN, the preset scene will be in color. If the IR cut filter is set to OUT, the preset scene will be in black- white.
•You can copy camera settings from one preset to another preset. To copy camera settings do the following:
(1)Use the joystick to position the cursor beside COPY CAMERA SETTINGS.
(2)Press Iris Open. The cursor moves to the right.
(3)Move the joystick up or down to view selections. Press Iris Open to enter selection.
•The “Apply to Global” setting allows camera settings specified for a particular preset to remain in effect even after the preset has been completed.
36 |