AUX
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA> <MOTION>
<AUTO TRACKING> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
AUX
AUX 1 MODE | TOGGLE |
DWELL TIME (SECS) | 1 |
AUX 2 MODE | TOGGLE |
DWELL TIME (SECS) | 1 |
<EDIT SCHEDULE> |
|
BACK |
|
EXIT |
|
An auxiliary output is a configurable signal from the dome back box that can trigger another device to operate. An auxiliary output can be configured to trigger from an alarm or from a controller.
An AUX 1 command from the controller will activate the relay in the dome and operate the device that is connected to the relay. The output of AUX 1 can be connected to the alarm input of a system switch to activate automatic monitor switching and recording.
An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the device that is connected to it.
The following are the available AUX mode settings:
TOGGLE (default): Changes the state of the auxiliary output every time an AUX command is received from the controller.
LATCHING: Must receive an AUX ON/AUX OFF command from the controller to turn the auxiliary output on/off.
MOMENTARY: An AUX ON command from the controller turns the auxiliary output on for the configured DWELL TIME. The auxiliary output will automatically turn off when the dwell time is finished.
EDIT SCHEDULE
The Edit Schedule menu is a duplicate of the Edit Event menu (refer to Event on page 53) with the following exceptions. In the Edit Schedule menu, the event type cannot be changed. Also, the Holiday feature cannot be accessed from the Edit Schedule menu.
For instructions on changing the features in the Edit Schedule menu, refer to Edit Event on page 54.
*This setting applies to Pressurized Spectra IV dome systems only.
46 |
