Enterasys Networks VH-8G manual Port Trunking Configuration

You can use the Port Trunking Configuration screen set up port trunks as shown below:

		Vertical Horizon Local Management --		VH-8G
		Port Trunking Configuration
	Trunk ID	Status	Member List
		1	2	3	4
	------------- ------------- ---------------- ----------------			----------------	----------------
		Port :	-- Port : --	Port : --	Port : --
		Port :	-- Port : --	Port : --	Port : --
		Port :	-- Port : --	Port : --	Port : --
	Trunk ID : 1		Trunk ID : 1 Member Port : 1
	[Show]	[More]
	[Enable]	[Disable]	[Add]	[Delete]
			<OK>
	Use <TAB> or arrow keys to move, other keys to make changes.
	Figure 2-29. Port Trunking Configuration
Parameter		Description
Trunk ID		Configure up to four trunks per switch (ID of 1~4).
Port		Select from 2~4 ports per trunk.
[Show]		Displays trunk settings, where the first trunk listed is specified by
		“Sorted by Trunk ID.”
[More]		Scrolls through the list of configured trunks.
[Enable] [Disable]		Enables/disables the selected trunk.

38 VH-8G User Interface VH-8G