![](/images/new-backgrounds/1184023/18402371x1.webp)
About the Macintosh adapter
An adapter the use with Macintosh computers is included with this unit. If image signals are to be input to this unit from a Macintosh computer, connect this adapter to the accessory VGA cable at the end of which is to be connected to the computer. The resolution of the video signals output from the Macintosh computer can be switched by changing the adapter DIP switch settings.
Set the DIP switches to match the desired resolution according to the table given below.
Display mode name/No. of dots | S1 S2 S3 | S4 S5 S6 | |
DIP switches |
|
|
|
MAC | 13/640×480 | ON OFF OFF OFF ON ON | |
MAC | 16/832×624 | OFF ON OFF OFF ON ON | |
MAC | 19/1024×768 | OFF OFF ON | OFF ON ON |
NOTE:
Different mouse cables are used for different types of computers. Therefore, do not use any mouse cables other than the supplied mouse cables.
The wireless mouse function operates only when input to the RGB 1 connector has been selected.
To mouse connector connector (male)
Accessory mouse cable
Operation
Click 1 button
Pointer button
Click 2 button
Pointer button
While gently pressing the pointer button with your thumb, push the pointer button back and forward and to the left and right. The pointer (arrow) will move back and forward and to the left and right on the screen.
Pointer | Click 1 button |
| This button corresponds to the button on a single- |
| button mouse, or to the left button on a standard |
| mouse with two buttons. |
Click 2 button
This button corresponds to the right button on a standard mouse with two buttons.
35