<Back, bottom and right view>
Lamp unit cover (page 42) | Front |
| |
Remove this cover to get access |
|
to the lamp unit. |
|
Fixing screw for the lamp |
|
unit cover (page 42) |
|
Remove this screw when |
|
replacing the lamp unit. |
|
Adjuster button (page 15) |
|
This button is used to |
|
unlock the adjustable legs. |
|
Adjustable legs (two) (page 15)
These legs can be used to adjust the angle of inclination of the projector.
<Side terminal board>
AUDIO OUT terminal (pages 33 and 34) This terminal is used to output audio signals which are input from the AUDIO IN terminal for RGB input or the AUDIO IN
RGB OUT terminal (page 34)
This terminal is used to output the RGB signal which is connected to the RGB 1 or RGB 2 input connector.
RGB 2 (RGB IN/AUDIO
IN) connector/terminal
(page 34)
This connector and terminal are used to input RGB signals and the audio signal which accompany them.
RGB 1 (RGB IN/AUDIO IN) connector /terminal (page 34)
This connector and terminal are used to input RGB signals and the audio signal which accompany them.
Remote control signal receptor (page 10)
This receives the infrared signal transmissions from the remote control unit.
Fixed legs
Air filter
This terminal is used to input
VIDEO IN terminal (page 33)
This terminal is used to input composite video signals.
AUDIO IN
VIDEO/VIDEO input (page 33) These terminals are used to input audio signals which correspond to the signals input to the VIDEO IN or
SERIAL connector (page 36) This connector is used to con- nect a personal computer to the projector in order to exter- nally control the projector.
MOUSE connector (pages 34 and 35)
This connector is used to connect an accessory or separate mouse cable. This lets you operate a personal computer using the pointer button and click buttons on the remote control unit instead of using a mouse.
8
