Panasonic PT-L595U manual Adjusting the sound to the desired setting

Numeric adjustment level display

Adjustment func- tion display

Adjusting the sound to the desired setting

You can adjust the volume and balance to the desired settings.

Adjustment procedure <for volume adjustment>

1.Press the MENU button to display the MENU screen.

2.Press the “ ” and “ ” buttons to select “AUDIO”.

3.Press the “<” and “>” buttons to display the AUDIO screen.

NOTE:

If the STD (Standard) button is pressed while the AUDIO screen at right is being displayed, the letters “STD” will be displayed in yellow in the top-right corner of the screen and only the BALANCE setting will be reset to the factory pre- setting. Furthermore, if the BALANCE setting has returned to the factory pre- setting, the value and the bar display for the BALANCE setting will be displayed in yellow.

4.Press the “ ” and “ ” buttons to select “VOLUME”.

To adjust the balance, select “BALANCE” instead.

5.Press the “<” and “>” buttons to display the VOLUME individual adjustment screen.

6.Continue pressing the “<” and “>” buttons to adjust the volume setting. The current setting will be displayed on the screen by numerals and a bar.

The adjustment range is between 0 and 63. (However, the adjustment range for the

balance setting is -32— +31.)

While “VOLUME” is selected, the volume of the sound coming from the built-in speakers

and the output level of the signal from theBar display AUDIO OUT terminal will change.

While “BALANCE” is selected, the left and right balance of the sound coming from the built-in speaker and the output level of the signal from the AUDIO OUT terminal will change.

NOTE:

If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the AUDIO screen.

Press the MENU button to return to the AUDIO screen or to clear the MENU screen.

If the STD (Standard) button is pressed while the BALANCE individual adjustment screen is being displayed, the value and the bar display will be appeared in yellow and only the BALANCE setting will be reset to the factory pre-setting.

The “VOLUME” adjustment made from the AUDIO screen has the same effect as pressing the volume adjustment buttons (VOL +/-) on the remote control unit.

If the volume level is set to “0”, no sound will be output from the AUDIO OUT terminal.

24