![](/images/new-backgrounds/1184023/18402355x1.webp)
Adjusting the horizontal amplitude
When
Adjustment procedure
1.Press the MENU button to display the menu screen.
2.Press the “ ” and “ ” buttons to select “POSITION”.
3.Press the “<” and “>” buttons to display the POSITION screen.
NOTE:
If the STD (Standard) button is pressed while the POSITION screen at right is being displayed, the letters “STD” will be displayed in yellow in the
4.Press the “ ” and “ ” buttons to select
5.Press the “<” and “>” buttons to display the
6.Continue pressing the “<” and “>” buttons to adjust the
The adjustment range is between 0 and 63.
| Adjustment func- |
|
| tion display |
|
| Numeric adjustment level display | Bar display |
|
| |
<When increasing the horizontal amplitude> |
| |
Press the “>” button. | The picture area will become wider in the |
|
| horizontal direction. |
|
<When decreasing the horizontal amplitude>
Press the “<” button. | The picture area will become narrower in the |
| horizontal direction. |
NOTE:
If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is being displayed, the display will return to the POSITION screen.
Press the MENU button to return to the POSITION screen or to clear the MENU screen.
If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre- setting.
27