Enterasys Networks X-PeditionTM manual Using TFTP, transfer updateBootrom.fls from the network

Utilizing the Command Line Interface

4.Using TFTP, transfer updateBootrom.fls from the network:

XSR-1805#copy tftp://192.168.27.95/C:/tftpDir/ updateBootrom.fls flash:updateBootrom.fls

Copy 'tftpDir/updateBootrom.fls' from server as 'updateBootrom.fls' into Flash(y/n) ? y

!!!!!!!!!!!!!!!!!!!!!!!!!!

Download from server done File size: 667172 bytes

5.Copy boot-config to restore-boot-config:

XSR-1805#copy flash:boot-config flash:restore-boot-config Copy 'boot-config' from flash: device

as 'restore-boot-config' into flash: device(y/n) ? y copying file flash:boot-config -> flash:restore-boot-config Copy OK: 12 bytes copied

12 bytes copied

6.Reconfigure boot-config to boot updateBootrom.fls:

XSR-1805(config)#boot system updateBootrom.fls updateBootrom.fls saved into flash:boot-config

7.Display the current list of files and the contents of boot-configand restore-boot-configto verify the transfers went smoothly:

XSR-1805#dir

Listing Directory flash:/		time	name
size	date

208OCT-31-2002 09:34:16 startup-config

3244017 OCT-31-2002 09:32:46 xsr1800.fls

820136OCT-31-2002 09:40:42 bootrom.fls

667172OCT-31-2002 09:42:06 updateBootrom.fls

18	OCT-31-2002	09:44:10	boot-config
12	OCT-31-2002	09:43:44	restore-boot-config

1,984,512 bytes free

6,727,680 bytes total

XSR-1805#more boot-config updateBootrom.fls

XSR-1805#more restore-boot-config

xsr1800.fls

8.This is a critical step and all previous steps must be completed accurately before proceeding. Reload and wait a couple of minutes. You will lose your Telnet session as the system reboots. The XSR will run updateBootrom.fls and update the Bootrom into the boot flash sectors.

Power must not be interrupted since a power failure or interruption may render the XSR unusable. The file, restore-boot-config, will be renamed to boot-config and updateBootrom.fls and bootrom.fls will be removed before the router is rebooted again.

XSR-1805#reload

Proceed with reload (y/n) ? y

9.Verify that the system is up by remotely logging in via Telnet. Enter show version and check the new Bootrom version.

XSR User’s Guide 2-31