Enterasys Networks X-PeditionTM Isdn ITU Standard Q.931 Call Status Cause Codes, BRI Leased Line

ISDN (ITU Standard Q.931) Call Status Cause Codes

XSR(config-if<BRI-1/1>)#no shutdown

XSR(config-if<BRI-1/1>)#dialer pool-member 1 priority 1

BRI Leased Line

The following example configures a leased-line BRI connection:

XSR(config)#interface bri 1/0

XSR(config-if<BRI-1/0>)#leased-line 64

XSR(config-if<BRI-1/0>)#leased-line 64

XSR(config-if<BRI-1/0>)#no shutdown

BRI Leased PPP

The following example configures a leased PPP connection on a BRI link:

XSR(config)#interface bri 1/0:2

XSR(config-if<BRI-1/0:2>)#no shutdown

XSR(config-if<BRI-1/0:2>)#encapsulation ppp

XSR(config-if<BRI-1/0:2>)#ip address 10.10.10.11 255.255.255.0

XSR(config-if<BRI-1/0:2>)#ppp keepalive

BRI Leased Frame Relay

The following example configures Frame Relay service over a multipoint leased BRI connection. For more information on Frame Relay, refer to “Configuring Frame Relay” on page 9-1.

XSR(config)#interface bri 1/0:1

XSR(config-if<BRI-1/0:1>)#no shutdown

XSR(config-if<BRI-1/0:1>)#encapsulation frame-relay

XSR(config-if<BRI-1/0:1>)#frame-relay lmi-type none

XSR(config)#interface bri 1/0:1.1 multi-point

XSR(config-if<BRI-1/0:1>)#ip address 2.2.2.2 255.255.255.0

XSR(config-if<BRI-1/0:1>)#frame-relay interface-dlci 16

XSR(config-if<BRI-1/0:1-16>)#no shutdown

ISDN (ITU Standard Q.931) Call Status Cause Codes

The XSR supports the Q.931 cause codes shown in the table below. Those codes marked with an asterisk (*) are decoded into text by ISDN debugging. All other codes display a plus sign (+).

Table 11-2 Call Status Cause Codes

Code	Cause
0	Valid cause code not yet received
1	Unallocated (unassigned) number
2	No route to specified transit network (WAN)
3	No route to destination
4	Send special information tone/Channel unacceptable
5	Misdialed trunk prefix
6	Channel unacceptable

11-16 Configuring Integrated Services Digital Network