System Alarms and Events

Table A-7 Medium Severity Alarms/Events (continued)

Module

Message

Description

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Receive Descriptors.

 

 

 

 

T1

T1E1 PCI Init Failed.

Error in initializing T1E1 HW card.

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Transmit Pending Queue.

 

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Transmit Done Queue.

 

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Transmit Descriptors.

 

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Receive Free Queue.

 

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Receive Done Queue.

 

 

 

 

T1

ERROR: Shared memory allocation failed

Error in allocating memory for T1E1 HW card.

 

for Receive Descriptors.

 

 

 

 

SNTP

SNTP request receive-timeout.

Failure to receive reply time from the server after one second.

SNMP SNMP auth failure from <ip address> <community>

An SNMP request received with an invalid community name. The community name with a maximum of 40 characters is displayed.

SNMP

SNMP <trapType> trap. No route to host

SNMP trap is added to retransmission queue because there is no

 

<IP address>

route to the SNMP target server

 

 

 

SNMP

CLI config mode locked by SNMP user

Process SNMP packet and begin to set values on a parameter under

 

%s\n

config mode.

 

 

 

SNMP

CLI config mode released by SNMP user

SNMP finished setting value on a parameter under config mode.

 

%s\n

 

 

 

 

SNMP

SNMP <trapType> trap dropped due to

Too many traps are sent at a time causing the SNMP trap queue to

 

queue overflow

overflow. As a result, the oldest item in the trap queue was dropped.

 

 

 

SNMP

No SNMP host is defined, traps are

An SNMP trap is enabled but the trap target server is not defined.

 

queued

 

 

 

 

SNMP

SNMP <trapType> trap dropped when

Failure to send an SNMP trap to the trap target server. The cause of

 

trying to send, cause unknown

the failure is unknown.

 

 

 

SNMP

SNMP <trapType> trap. No route to host

An SNMP trap is added to the retransmission queue because there is

 

<ip address>

no route to the SNMP target server.

 

 

 

PPP

PPP CHAP authentication failed while

PPP CHAP authentication has failed while authenticating the remote

 

authenticating remote peer's response

peer's response to the challenge.

 

 

 

PPP

PPP CHAP authentication failed while

PPP CHAP authentication has failed while being authenticated by the

 

being authenticated by remote peer

remote peer.

 

 

 

PPP

PPP CHAP authentication success while

PPP CHAP authentication has passed while authenticating the remote

 

authenticating remote peer's response

peer's response.

 

 

 

PPP

PPP CHAP authentication success while

PPP CHAP authentication has passed while being authenticated by

 

being authenticated by remote peer

the remote peer.

 

 

 

PPP

PPP MS-CHAP authentication failed while

PPP MS-CHAP authentication has failed while authenticating the

 

authenticating remote peer's response

remote peer's response to the challenge.

XSR User’s Guide A-9

Page 431
Image 431
Enterasys Networks X-PeditionTM manual Sntp