Nortel Networks 40M2420 manual Cfg/l3/igmp/mrouter, Igmp Static Multicast Router Configuration

Alteon OS Command Reference

Table 6-88IGMP Relay Mrouter Menu Options (/cfg/l3/igmp/relay/mrtr)

Command Syntax and Usage

ena

Enables the multicast router.

dis

Disables the multicast router.

del

Deletes the multicast router from IGMP Relay.

cur

Displays the current IGMP Relay multicast router parameters.

/cfg/l3/igmp/mrouter

IGMP Static Multicast Router Configuration

[Static Multicast Router			Menu]
add	- Add port		as Multicast Router Port
rem	-	Remove port as Multicast Router Port
cur	-	Display current Multicast Router configuration

Table 6-89describes the commands used to configure a static multicast router.

NOTE – When you configure a static multicast router on a VLAN, the process of learning mul- ticast routers is disabled for that VLAN.

Table 6-89IGMP Static Multicast Router Menu Options (/cfg/l3/igmp/mrouter)

Command Syntax and Usage

add <port number> <VLAN number> <IGMP version number>

Selects a port/VLAN combination on which the static multicast router is connected, and configures the IGMP version (1, 2, or 3) of the multicast router.

remove <port number> <VLAN number> <IGMP version number>

Removes a static multicast router from the selected port/VLAN combination.

cur

Displays the current IGMP Static Multicast Router parameters.

290 „ Chapter 6: The Configuration Menu 40M2420, April 2007