![STANDARD REAR EXHAUST](/images/new-backgrounds/190130/19013053x1.webp)
Installation Instructions
BEFORE YOU BEGIN
•Remove and discard existing plastic or metal foil duct and replace with
•Remove any lint from the wall exhaust opening.
Wall
Internal
Duct
Opening
Check that exhaust
hood damper opens
and closes freely.
STANDARD REAR EXHAUST
We recommend that you install your dryer before installing your washer. This will permit direct access for easier exhaust connection.
Slide the end of the exhaust duct on the back of the dryer and secure with duct tape or
a hose clamp.
Duct
NOTE: We strongly recommend using rigid metal exhaust duct.
•For
Wall Side
Dryer
Side
RECOMMENDED CONFIGURATION TO MINIMIZE EXHAUST BLOCKAGE
Using duct elbows will prevent duct kinking and collapsing.
Transition
Ducting
27