GE UPVH890 About cycle options, Operating, Safety Instructions, Consumer Support, Extend Tumble

Models: UPVH890

1 152
Download 152 pages 17.16 Kb
Page 9
Image 9
About cycle options.

About cycle options.

NOTE: Not all features are available on all dryer models.

GEAppliances.com

Extend Tumble

Minimizes wrinkles by adding approximately 60 minutes of no-heat tumbling after clothes are dry.

The light around the button will light up when EXTEND TUMBLE is on.

Extend Tumble is automatically selected for the SteamRefresh cycle and cannot be deselected. Dryer will beep and display “Garments Ready” when SteamRefresh is complete. The dryer will continue in Extend Tumble until the door is opened.

Safety Instructions

Damp Alert

This option causes the dryer to beep when clothes have dried to a damp level. Remove items that you wish to hang dry. The DAMP ALERT will only beep when this option is selected.

Removing clothes and hanging them when they are damp can reduce the need to iron some items.

The light around the button will light up when DAMP ALERT is on.

Operating

Drum Light

Press this button to turn on the light in the dryer.

Press the button again to turn the light off.

This only controls the light when the door

is shut. NOTE: The light will turn off by itself after one minute when the door is shut.

When the door is opened, the light comes on automatically.

The light around the button will light up when DRUM LIGHT is on.

Delay Start

Use to delay the start of your dryer.

1.Choose your dry cycle and any options.

2.Press DELAY START. You can change the delay time in 1/2-hour increments, using the or arrow pads.

3.Press the START/PAUSE button to start the countdown.

The countdown time will be shown in the ESTIMATED TIME REMAINING display.

NOTES:

If the door is opened while the dryer is in DELAY, the countdown time will not restart unless the door is closed and START/PAUSE button has been pressed again.

You can delay the start of a dry cycle up to 24 hours.

The light around the button will light up when DELAY START is on.

Instructions

Troubleshooting Tips

Press to lock control. Hold 3 seconds to unlock.

Lock

You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle.

Children cannot accidentally start the dryer by touching pads with this option selected.

To lock the dryer, press the LOCK button.

To unlock the dryer, press and hold the LOCK button for 3 seconds.

The light around the LOCK button will light up when the controls are locked.

Even though the controls are locked, the POWER button is still active

in case you have to turn the unit off.

9

Consumer Support

Page 9
Image 9
GE UPVH890 About cycle options, Operating, Safety Instructions, Consumer Support, Extend Tumble, Damp Alert, Drum Light