Installation Instructions
3REVERSE DOOR HANDLE AND CAPS
ALay the chrome cover down on a soft, protected, flat surface so that the inner part faces upward (resting on the handle side). Disassemble the door cap from the chrome
cover on the″ handle side by removing 2 screws (#8 x 0.625 tapping screws).
2 x D
Screws
Door cap
BDisassemble the inner handle from the outer″ handle by removing 3 screws (#8 x 0.625 tapping screws). Disassemble the outer handle
from the chrome″ cover by removing 4 screws (#8 x 0.625 tapping screws).
| 3 x D | |
| Screws | |
| (inner | |
| handle) | |
Remove |
| |
4 x D screws | Outer | |
(outer handle) | ||
handle | ||
|
3REVERSE DOOR HANDLE AND CAPS (CONT.)
CPop the 2 handle caps out toward you and reassemble on the opposite side of the chrome cover, where you removed the outer handle.
Handle caps 
DAssemble the outer handle onto the opposite
side of the ″chrome cover, using 4 screws (#8 x 0.625 tapping screws).
| Replace | |
| 4 x D | |
Outer | screws | |
(outer | ||
handle | ||
handle) | ||
|
35
