Installation Instructions
REVERSING THE DOOR SWING (if desired)
BEFORE YOU START
Unplug the dryer from its electrical outlet.
1REMOVE THE DOOR ASSEMBLY
Remove the side hinge cap by opening
the dryer door and removing″ the screw from behind the hinge (#8 x .375 tapping screw). Then using your hand, pop the hinge cap off the dryer.
1 x C Screw
Hinge cap
1REMOVE THE DOOR ASSEMBLY (cont.)
Hold the door″ and remove the 2 hinge screws (#10 x 0.75 tapping screws). Pull the door away from the dryer front panel.
2 x B
Screws
2DISASSEMBLE THE DOOR ASSEMBLY
Lay the door down on a soft, protected, flat surface so that the inner part faces upward (door resting on the handle side).
Remove the 7 screws (#10 x 1.125″ tapping screws) located around the perimeter of the door.
7 x A Screws
Turn the door assembly over and separate the chrome cover from the inner door. Put the inner door aside on a soft, protected flat surface.
34