Rear opening

Installation Instructions

EXHAUSTING THE DRYER (cont.)

SIDE VENTING:

Dryer Exhaust to right of cabinet for Electric models only.

Dryer Exhaust to left of cabinet for Gas and Electric models.

WARNING – BEFORE

PERFORMING THIS EXHAUST INSTALLATION, BE SURE TO DISCONNECT THE DRYER FROM ITS ELECTRICAL SUPPLY. PROTECT YOUR HANDS AND ARMS FROM SHARP EDGES WHEN WORKING INSIDE THE CABINET. BE SURE

TO WEAR GLOVES.

Remove Right screw

and save

Left

Bottom

Remove desired knockout (one only)

Detach and remove the bottom, right or left side knockout as desired. Remove the screw inside the dryer exhaust duct and save. Pull the duct out of the dryer.

Fixing hole

A

1338

Cut the duct as shown and keep portion A.

TAB LOCATION

Not for gas

Bend tab up 45°

Through the rear opening, locate the tab in the middle of the appliance base. Lift the tab to about 45°, using a flat-blade screwdriver.

ADDING A NEW DUCT

Fixing hole

Portion “A”

Left side exhaust

Reconnect the cut portion (A) of the duct to the blower housing. Make sure that the shortened duct is aligned with the tab in the base. Use the screw saved previously to secure the duct in place through the tab on the appliance base.

ADDING ELBOW AND DUCT FOR EXHAUST TO LEFT OR RIGHT SIDE OF CABINET

Internal duct

Insert the 4″ elbow through the rear opening and connect the elbow to the dryer internal duct.

Side opening

Insert the 4″ duct through the side opening and connect it to the elbow.

CAUTION: Do not pull or damage the electrical wires and do not remove the vinyl cover from the electrical components inside the dryer when inserting the duct. A slight interference may occur between the exhaust and the wire components.

28

Page 28
Image 28
GE UPVH890 Installation Instructions Exhausting the Dryer, Side Venting, TAB Location, Adding a NEW Duct, To Wear Gloves

UPVH890 specifications

The GE UPVH890 is a state-of-the-art ultrasound machine that redefines imaging capabilities in the medical field. It is designed for comprehensive diagnostic applications, emphasizing portability, versatility, and advanced imaging technologies. This device stands at the intersection of functionality and user-friendliness, making it a valuable asset in various healthcare settings, from hospitals to outpatient clinics.

One of the main features of the UPVH890 is its lightweight design. Weighing significantly less than traditional ultrasound machines, it offers unparalleled portability, allowing healthcare providers to transport it easily from room to room or even to remote locations. This is particularly advantageous in emergency situations where rapid ultrasound assessments are crucial.

The UPVH890 employs cutting-edge imaging technologies, including advanced three-dimensional and four-dimensional imaging capabilities. These features enable clinicians to visualize complex anatomical structures in real-time, enhancing diagnostic accuracy. The system is equipped with enhanced Doppler imaging, crucial for evaluating blood flow, and provides high-resolution images that aid in better assessment of conditions.

Additionally, the device incorporates artificial intelligence (AI) algorithms, which streamline the workflow and improve image interpretation. The built-in AI assists clinicians by providing automated measurements and suggesting the most likely diagnosis based on the obtained data, ultimately leading to quicker and more accurate patient care.

The UPVH890 also boasts an intuitive touchscreen interface that facilitates easy navigation through various settings and functions. This feature reduces the learning curve for new users and enhances efficiency for experienced operators. The customizable user interface allows healthcare providers to tailor the machine's settings according to their specific preferences and the needs of their patients.

In terms of connectivity, the UPVH890 supports wireless communication, enabling seamless integration with electronic medical record (EMR) systems. This capability ensures that patient information is readily available, promoting coordinated care and efficient follow-up processes.

Overall, the GE UPVH890 ultrasound machine stands out for its innovative features, intelligent technologies, and user-centric design that collectively enhance diagnostic efficiency and patient care. It represents a significant advancement in the field of medical imaging, catering to a wide range of clinical needs while ensuring ease of use and accessibility.