GE UPVH890 Installation Instructions INSTALLING THE PEDESTAL if desired, Remove The Leveling Legs

Installation Instructions

INSTALLING THE PEDESTAL (if desired)

CAUTION — Due to the size and weight of these products, and to reduce the risk of personal injury or damage to the product, TWO PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.

KIT CONTENTS

❒ 4 Support pads

❒ Drawer divider

❒4 Mounting screws

TOOLS YOU WILL NEED

❒ Phillips-head	❒ 7 mm Socket wrench
screwdriver

❒9/16″ Open-end wrench or adjustable wrench

INSTALLATION PREPARATION

Remove the packaging.

The drawer divider is taped at the top of the shipping carton. Remove the divider and set aside for final installation.

Flatten the product carton to use as a pad to lay the washer or dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location.

1 REMOVE THE LEVELING LEGS

ACarefully lay the washer or dryer on its side to access the leveling legs on the bottom of the appliance.

IMPORTANT: Do not lay the washer or dryer on its back! Do not remove the shipping bolts on the back side of the washer. The bolts must remain in place until the washer is returned to an upright position.

BUse an open-end wrench to remove the washer or dryer leveling legs.

Back out and remove all 4 leveling legs

41