GE UPVH890 Installing The Stack Bracket Kit, Kit Contents, Installation Preparation

Installation Instructions

KIT CONTENTS

❒ Right hand bracket ❒ 4 #12 x 1″ screws

❒ 4 #8 x 1/2″ screws

❒Left hand bracket

❒4 rubber pads

TOOLS YOU WILL NEED

❒ Phillips screwdriver

	❒ Gloves
❒ Open-ended wrench	❒ Level
❒ Pliers

INSTALLATION PREPARATION

Remove the packaging.

Flatten the product carton to use as a pad to lay the dryer down on its side. Continue using the carton to protect the finished floor in front of the installation location.

INSTALLING THE STACK

BRACKET KIT

1REMOVE THE DRYER LEVELING LEGS

A.Carefully lay the dryer on its side. Use the packing material so you don’t scratch the finish on the dryer.

B.Use an open-end wrench or pliers to remove the dryer leveling legs.

Back out and remove all 4 leveling legs

2INSTALL RUBBER PADS TO DRYER BASE

Locate the 4 rubber pads in the parts package. Remove the adhesive backing and firmly place over on the bracket where you removed the leveling legs.

39