ClearOne comm AP10 operation manual Appendices, Appendix A Specifications

APPENDICES

Appendix A: Specifications

Dimensions (LxDxH)

17.25" x 10.25" x 1.75" 43.8 x 26 x 4.5 cm

Weight

7.5 lb/3.4 kg dry

12.6 lb/5.7 kg shipping

Operating Temperature

32–100° F 0–38° C

Humidity

0% to 80%, non-condensing

Power Input Range Auto-adjusting100–240VAC; 50/60Hz

Power Consumption

8W typical

Front Panel DIP Switches

Device Identification:

4-position DIP switch Receive AGC Auto-Answer Auto-Disconnect Self-Adapt

Disconnect on Loop or Loop and Call Progression

Noise Burst Adapt

Momentary On/Off Latching On/Off

G-Link In/Out Proprietary Network RJ-45 (2), 38.4kbps, 110kΩ impedance Category five twisted-pair cable 20' (6.1 meters) maximum cable length between two networked devices

Control/Status

DB-25 female

Inputs: active low (pull to ground)

Outputs: Open collector, 40VDC max, 40mA each Unbalanced Transmit and Receive

Telco Line

RJ-11

POTS (plain old telephone service) or analog extension from a PBX A-lead supervision provided

Telco Set

RJ-11

Connect analog telephone set A-lead supervision provided

Transmit Input Push-on terminal block, balanced, bridging Impedance: >20kΩ Nominal Level: 0dBu Maximum Level: 20dBu

Receive Output

Push-on terminal block, balanced Impedance: <50Ω

Nominal Level: 0dBu

Maximum Level: 20dBu

Audio Performance Conditions: Unless otherwise specified, all measurements are performed with a 250Hz to 3.5kHz BW limit (no weighting). Reference to 0dBu at -15dBm on/off the telephone line (Receive AGC disabled).

Frequency Response: 250Hz to 3.5kHz, ±1dB

SNR: >56dB

THD+N: <0.3%

Telco Echo Cancellation

TEC tail time: 31ms

TEC null: 55dB nominal

Approvals

FCC, CSA, CE

Set-up Software

AP-Ware

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760