8Getting started
Battery low warning |
| 2. Make sure the battery ribbon is |
| ||
If the | icon flashes in the external display | laying flat inside the compartment |
| ||
you will need to recharge the handset before | and insert the two batteries supplied |
| |||
you can use it again. |
| observing the polarity markings |
| ||
|
|
|
| ||
During charging, the | icon will scroll in | (+ and |
|
| |
the display. |
|
|
|
| |
|
|
| 3. Attach the battery compartment |
| |
Battery performance |
| cover by sliding the ends into the |
| ||
| holes inside the compartment, |
| |||
In ideal conditions, fully charged batteries should |
| ||||
pressing down and pushing the other |
| ||||
give about 10 hours talk time or 100 hours |
| ||||
standby time on a single charge. | end along until it clicks into place. |
| |||
Note that new batteries do not reach full capacity | 4. Place the handset on the base to |
| |||
until they have been in normal use for several |
| ||||
days. |
|
| charge for at least 24 hours. The red |
| |
To keep your batteries in the best condition, leave | charging light comes on. When the |
| |||
the handset off the base for a few hours at a time. | handset is fully charged the display |
| |||
Running the batteries right down at least once a |
| ||||
shows the | icon. |
| |||
week will help them last as long as possible. |
|
|
| ||
The charge capacity of rechargeable batteries | 5. After 24 hours, plug the telephone |
| |||
will reduce with time as they wear out, giving | line cord from the base into the |
| |||
the handset less talk/standby time. Eventually | telephone wall socket. |
| |||
they will need to be replaced. New batteries are |
| ||||
|
|
| |||
available from the BT Synergy Helpline on | Setting up for multiple packs |
| |||
0800 145 6789*. |
|
| |||
After charging your handset for the first time, | If you have purchased a multiple pack, this process will need to be carried out | ||||
for all handsets and chargers: |
| ||||
subsequent charging time is about |
| ||||
day. Batteries and handset may become warm | 1. Plug the mains power cable into the socket marked | on the underside of | |||
during charging. This is normal. | |||||
|
|
| the charger. |
|
|
If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com