BT 5500 manual Remote access, Answering machine, Switch remote access PIN On or Off

Answering machine 47

	Remote access			Memory full
	You can operate your answering machine from any Touchtone™ phone by			If the memory is within 10 seconds of becoming
				full while a caller is leaving a message, they will
	calling your BT Synergy 5500 and entering a 4 digit security code.			hear, “ Please complete your message within
				10 seconds”. If they are still talking when the
				memory becomes full the caller hears, “Thank
	Switch remote access PIN On or Off.			you for calling”, and the machine will hang up.
				The OGM will set to Answer Only. You must delete
1.	Press Menu, scroll		to Answer Machine and press Select.	messages before your BT Synergy 5500 can
				record new messages.
2.	Scroll	to Answer Settings and press Select.
3.	Scroll	or	to Remote Access and press Select.
4.	Scroll	or	to highlight On or Off and press Select.
5.	Press Back to return to standby.
	Change the remote access PIN			IMPORTANT
1.	Press Menu, scroll to Answer Machine and press Select.			You should change the security PIN from the
				original setting of 0000.
2.	Scroll	to Answer Settings and press Select.		It is advisable to make a note of your new PIN
3.	Scroll	or	to Remote Access and press Select.	code and keep it somewhere safe.

4.Scroll or to highlight SET remote PIN and press Select.

5.Enter the Old 4-digit PIN and press Save. (Default setting = 0000)

6.Enter the new 4-digit Pin and press Save.

7.Enter the new PIN again and press Save.

8.Press Back to return to standby.

If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com