Nortel Networks C4030 Making a call in the Pre-Dial Mode, To make a call, To correct an error

C4 030 H and se t Stan d ard 1 . 00

Making a call in the Pre-Dial Mode

To make a call:

1.In Standby mode, dial the

number using the keypad (up to 26 digits).

Note: The dialed number displays on two lines when you enter a number with more then 10 digits. To display more than 20 digits, the character size is reduced.

		2.	Press the			key to initiate the call.
To correct an error:			Move the cursor using the scroll
			arrows.
			or
			Use the			key to delete a character
			in front of the cursor or insert a
			missing digit at the cursor location.
			or
			Press the			key for 2 seconds to
					r
			delete the whole line.
To hang up:			Press the jkey again.
You can place a call by pressing the			key before dialling the number.
f	m	j			j
A	icon displays as well.
It is not possible to use the		key in pre-dial mode. In pre-dial mode, the key
accesses the shortcut menu.				r
14