** PRESET NUMBER SET **

 

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

ID:

RET

Position Setting (POSITION SET)

Aligns the camera position and focal point by panning, tilting, zooming and focusing.

1.Move the cursor to POSITION SET on the preset setting menu and press the CAM (SET) key.

The position setting menu appears.

PRESET NO. 1

 

 

 

 

 

POSITION SET

O

O

PRESET ID

ON

ALC/MANUAL

ALC

O

AF MODE

MANUAL

RET DEL

2.To Set Panning/Tilting Positions

(1)Move the cursor to PUSH SET for PAN/TILT and press the CAM (SET) key. The PAN/TILT setting menu appears.

(2)Select panning/tilting positions by moving the joystick up and down, right and left, and press the CAM (SET) key.

The positions are set and the screen returns to the position setting menu.

** POSITION 1 **

PAN/TILT

PUSH SET

ZOOM/FOCUS

PUSH SET

RET

FLOOR 1

DOOR

Note: When you press the CAM (SET) key, the camera might move slightly to memorize the nearest panning/tilting position.

3.To Set the Lens Zoom and Focus Positions

(1)Move the cursor to PUSH SET for ZOOM/FOCUS and press the CAM (SET) key. The ZOOM/FOCUS setting menu appears.

(2)Select a zoom position by moving the zoom control up and down, and a focus position by moving the focus control up and down, and then press the CAM (SET) key.

The positions are set and the screen returns to the position setting menu.

** POSITION 1 **

PAN/TILT

PUSH SET

ZOOM/FOCUS

PUSH SET

RET

FLOOR 1

DOOR

Notes:

When the camera is used at a nearly horizontal angle, the focus may not be adjustable to a high level of accuracy.

If you move the cursor to the position number and move the joystick to the right or left, the position number can be selected.

The selected preset position number can also be set after pressing the CAM (SET) key.

The preset and camera IDs appear in the lower-left corner of the position setting menu after they have been set.

With the WV-CU550CJ, you can also select a zoom position by moving the zoom wheel con- troller to the right or left.

With the WV-CU550CJ, you can also select a focus position automatically by pressing the top button.

** POSITION 1 **

PAN/TILT

PUSH SET

ZOOM/FOCUS

PUSH SET

U ZOOM D/L FOCUS R

RET

FLOOR 1

DOOR

4.Move the cursor to RET and press the CAM (SET) key to return to the preset setting menu.

-31-

Page 30
Image 30
Panasonic WV-NS324 operating instructions Position Setting Position SET, To Set Panning/Tilting Positions