Panasonic WV-NS324 operating instructions Preparations for the PC, Network Setup of Your PC

PREPARATIONS FOR THE PC

■Network Setup of Your PC

To set up the network of the PC, first change the TCP/IP settings of the PC to match them to the default settings of the camera.

The following are the default network settings of the camera.

IP address	: 192.168.0.10
Subnet mask	: 255.255.255.0
Default gateway	: 192.168.0.1

To access the camera, the IP address of the PC should be "192.168.0.XXX" (where XXX should be a number from 2 to 254 except 10).

Note: The procedure described below is based on the assumption that Windows XP is running on the PC. When running an OS other than Windows XP, see the manual included with the OS.

1.Start up your PC.

2.Click the [Start] button and select "Control Panel".

4. Double-click the "Network Connections" icon.

➜

5.Click "Local Area Connection 2", and then click "Change settings of this connection" in the "Network Tasks" menu.

➜

➜

6. Click "Internet Protocol (TCP/IP)", and then click the [Properties] button.

3. Double-click the "Network and Internet Connections" icon.

➜ ➜

-16-