Panasonic WV-NS324 operating instructions Auto

3.Panning starting point and panning endpoint Follow the steps below.

(1)Move the cursor to POSITION and press the CAM (SET) key. The cursor moves to START.

** AUTO	PAN **
	START
POSITION
	END
SPEED	••••••••
	L	H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	2S
RET
** AUTO	PAN **
POSITION
	START
	END
SPEED	••••••••
	L	H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	2S

RET

(2)Move the joystick to the right or left to select a panning starting point and press the CAM (SET) key.

This determines the starting point and the cur- sor moves to END.

** AUTO	PAN **
POSITION	START
SPEED	END	••••
	••••
	L		H
PAN LIMIT	OFF
ENDLESS	OFF
DWELL TIME	2S

RET

(3)Move the joystick to the right or left to select a panning endpoint and press the CAM (SET) key.

This determines the endpoint, and the cursor moves to POSITION.

4.Panning speed

The panning speed increases when the joystick is moved to the right, and decreases when it is moved to the left.

** AUTO PAN **

POSITION START

END

SPEED ••••••••

L H

PAN LIMIT OFF

ENDLESS OFF

DWELL TIME 2S

RET

Notes:

•If the panning range is changed after the camera has not panned for a long time or has been pan- ning in the same panning range, the picture may not be clear or noise may appear. In this case, pan the camera fully several times.

If this does not eliminate the problem, refer servic- ing to qualified service personnel.

•When you press the CAM (SET) key, the camera might move slightly to memorize the nearest pan- ning/tilting position.

5.Pan limit ON/OFF

The factory default setting is OFF.

ON: Manual pan is limited from the starting point to the endpoint specified by position setting. Set ENDLESS to OFF before setting PAN LIMIT to ON.

OFF: Manual pan is not limited.

Endpoint
Start-end	Camera
	Self-end
range of	range of
auto pan	pan limit

Starting point

Note: When ON is selected for PAN LIMIT, manual pan moves the camera away from the other side (PAN LIMIT) of the start-end range.

6.ENDLESS to ON/OFF

The factory default setting is OFF.

ON: The camera pans from the starting point to the endpoint, and keeps rotating in the same direction to return to the starting point. Set PAN LIMIT to OFF before setting ENDLESS to ON.

** AUTO PAN **
POSITION	START
	END
SPEED	••••••••
	L	H
PAN LIMIT	OFF
ENDLESS	ON
DWELL TIME	2S

RET

OFF: The camera pans from the starting point to the endpoint, and rotates backward to the starting point.

This movement is repeated over and over.

7.Dwell time

The factory default setting is 2S. Dwell time changes as follows:

-35-