3.Enter "admin" in the user name line. According to the default setting, you need not enter the pass- word. The "Network Setup" window appears.

4.Set the following parameters.

Note: Ask your system administrator about param- eters if you are unsure.

IP Address: Enter numbers 0 through 255 into four sections split by dots.

Netmask: Enter numbers 0 through 255 into four sections split by dots.

HTTP Port: Enter different numbers for each when multiple cameras are connected.

DHCP (Dynamic Host Configuration Protocol): When set to ON, you need not input the IP address and netmask.

DNS (Domain Name System): Set to ON when using DNS. Enter the primary address. If nec- essary, enter the secondary address.

When set to AUTO, the DHCP server will auto- matically send you an address.

DDNS (Dynamic DNS): Consult your system administrator.

Note: You can correct the DHCP setting to off via the Panasonic IP setting or Camera control menu if you have wrongly set DHCP to ON in a none-DHCP/DHCP server system.

For details refer to Setup included in the "Panasonic IP Setup" Software provided.

5.Click the [SET&REBOOT] button. The changed parameters will be validated, and the camera and the PC will restart.

Notes:

Do not omit step 4 above to validate new parameters.

Wait around 5 seconds or more when execut- ing [SET&REBOOT] button.

6.Close the browser software, and the PC.

-22-

Page 22
Image 22
Panasonic WV-NS324 operating instructions Ddns Dynamic DNS Consult your system administrator