Necessaries, Connection to Internet Type | Panasonic WV-NS324

•Connection to Intranet (Type 2)

A switching hub connected to the intranet is placed between the camera and the PC.

Network Cable (Straight type)

Switching Hub

PC

(16 clients maximum)

Necessaries:

•Straight-type network cable (Category 5)

•Switching hub or router (for 10BASE-T/100BASE- TX)

•Connection to Internet (Type 3)

The PC accesses the camera through the Internet and the DSL/CATV modem.

Necessaries:

•Straight-type network cable (Category 5)

•CATV modem (cable modem) or DSL modem

•Switching hub or router (for 10BASE-T/100BASE- TX)

Notes:

•Setting the router is required when connecting more than one camera. Refer to the manual includ- ed with the router.

•The camera does not support PPPoE. Use a router that handles PPPoE when connecting the camera using that protocol.

•A global-type IP address is required when con- necting via the Internet.

Network Cable

(Straight type)

Internet

DSL/CATV Modem

PC

(16 clients maximum)

Necessaries:

•Straight-type network cable (Category 5)

•CATV modem (cable modem) or DSL modem

•Connection to Internet (Type 4)

A switching hub or a router may be added to a type 3 connection.

Network Cable (Straight type)

Switching Hub or Router

PC

(16 clients maximum)

Internet

DSL/CATV Modem

-14-

Image 14

Panasonic WV-NS324 operating instructions Necessaries, Connection to Internet Type

Contents

Operating Instructions English Version Important Safety Instructions Contents System Requirements FeaturesPreface Trademarks Document Convention Camera CleaningPreset Data Uploading or Downloading Precautions Construction Disassembling the Camera InstallationSetting Switches Assemble the Camera Cutout in Decoration Cover Top Cable Exit Top Cable Exit Connect this to 24V AC Class 2 Power Supply only AC Power Supply ConnectionHow to Assemble the Cable with the Accessory Connector Connections Network Connections Necessaries Connection to Internet Type DNS Setup with PCSetup with the Provided Panasonic IP Setup Software Network Setup of Your PC Preparations for the PC Network Setup of the Camera Page Dhcp Network Setup Parameters vs. Connection TypeConnection type Parameter description Ddns Dhcp server assigns an IP address to the camera automatical Preliminary Setup Ddns Dynamic DNS Consult your system administrator Multi Screen Select Access from the PCOperating the Camera Camera Control Access from a System Device PAN/TILT ZOOM/FOCUS Iris Preset Auto PAN Function Comparison / PC Network vs. Camera site Camera Setup Menus Prior to SetupButtons Used for Setup Menus From the PC Setup Setup Menu Focus Switch Menu Display Setting ProceduresPresetting To Set the Lens Zoom and Focus Positions Position Setting Position SETTo Set Panning/Tilting Positions Preset Identification Setting Preset ID Auto Focus Setting AF Mode Deleting Preset PositionsLight Control Setting ALC/MANUAL To Return to the Preset Number Set Menu Auto Mode Selection Auto Mode Home Position Setting HomeSelf-return Setting Self Return OFF Auto PAN Auto Image Hold Image Hold Flip-A-Chip SettingCleaning Cleaning 30S 20S 10S Camera Identification Camera ID Camera SettingTo Display the Camera Setting Menu To Enter a New Camera ID ALC Mode with BLC on ALC Mode with BLC OFF Gain Control AGC Shutter Speed Setting ShutterLine-lock Sync Mode LL Synchronization Sync Auto-Tracing White Balance Mode ATW White Balance White BAL Automatic White Balance Control Mode AWC Electronic Zoom EL-ZOOM X4 FIX X2 FIX OFF Electronic Sensitivity Enhancement Sens UPMotion Detector Motion DET Digital Noise Reduction DNR Demonstration Display Demo ModeSpecial Menu Special Reset to the Factory Default Settings To Restore the Camera Default Position RefreshCamera Resetting Camera Reset To Close the Special Menu Camera Setup with PC Alarm Setup Setup from PCImage Setup FTP Client Setup User Setup Host Setup System Setup Multiscreen Setup Preset Setup Auto Pan Setting Initializing Setting the SwitchesCommon procedures Viewing Pictures Still Picture Storage to the PC Alarm Functions When alarm arises Detection Area Setup Canceling Alarm DisplayVMD Setup Transferring Picture FilesPage Reviewing Alarm Pictures Step Resetting AlarmHow to customize contents of e-mail notification Substitution Letter Description indication type etc User Name admin Password None Step Auxiliary Output Control Auxiliary Output Control Troubleshooting Network Section SpecificationsPrevention of Blooming and Smear Camera Section Lens/Mechanism sections AccessoriesOptional Accessories Appendix Panasonic Digital Communications & Security Company