Konica Minolta 7075 manual To select the Vertical/Horizontal width setting mode

Applications

Repeat Image (continued)

3To select the Vertical/Horizontal width setting mode:

(1)Touch Vertical/Horizontal.

(2)Specify the vertical and horizontal widths of the scanning area using up/down arrow key, from 10~150 mm in 1 mm increments. Keep touching the key to increase/decrease the value continuously.

Or, touch ENTER REPEAT WIDTH BY KEYPAD to display the popup screen to enter the value from the touch screen keypad. Touch Verti./Horiz key on the popup screen each time to shift it from one to another. Touch OK to restore the Repeat Mode Selection Screen

Repeat Mode Selection Screen (with popup screen displayed)

To select the Auto detection mode, touch AUTO. Non-image area erase will function automatically.

To select the Repeat mode, touch 2 Repeat, 4 Repeat, or 8 Repeat, as desired.

4Touch OK to return to the Application Selection Screen.

5Select additional copying features, as desired.

When 2 Repeat mode is selected, Page spece function of Image shift can be used to make the desired amount of blank space between the two images on a page. See p. 9-34 to p. 9-37.

6Touch OK to complete the setting and return to the Basic Screen.

7Enter the desired print quantity.

8Position original(s) FACE DOWN on the platen glass.

IMPORTANT: DO NOT CLOSE THE DOCUMENT FEEDER WHEN AUTO, 2 REPEAT, 4 REPEAT, OR 8 REPEAT IS SELECTED IN STEP 3.

When using Platen store mode, 1-2 mode can be selected. See p. 6-28 to p. 6-29.

Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return to the Basic Screen. See p. 6-35 to p. 6-37.

9Press [START].

After copying is completed, touch Repeat on the Application Selection Screen or press [AUTO RESET] to release the mode and reset the machine.

9-28 Applications