Konica Minolta 7075 manual SW No Setting default is underlined

Key Operator Mode

Memory Switch Setting [13]

This function allows you to change the Memory Settings listed below. See pp. 13-41~13- 45 for details on Memory Settings.

SW No.	Item	Setting (default is underlined)
No. 01:	Auto reset timer	OFF/ 30 sec./ 60 sec./ 90 sec./ 120 sec./150 sec./
		180 sec./ 210 sec./ 240 sec./ 270 sec./ 300 sec.
No. 02: AUTO RESET key function		Full-Auto/ Initial Setting
No. 03:	RADF-Original effect	RADF AUTO RESET key selected/ RADF selected
No. 04: Job memory auto recall (30)		OFF/ ON
No. 05:	Finisher mode by Full-auto	Face down (Sub tray)/ Non-sort/ Sort/ Staple sort/
		Folding&Stapling/ Folding/ Face up (Sub tray)
No. 06: Initial by Key counter insert		OFF/ ON
No. 07:	Erasure outside area of orig.	Erased for except Platen (1:1)/ Area outside of
		orig. erased/ Erased for APS/AMS only
No. 08:	RADF frame erasure selection	None/ 1mm frame/ 2mm frame/ 3mm frame/
		4mm frame/ 5mm frame
No. 09: Automatic tray switching		OFF/ ON
No. 10:	Platen APS	OFF/ ON
No. 11:	RADF APS	OFF/ ON
No. 12:	Platen AMS	OFF/ ON
No. 13:	RADF AMS	OFF/ ON
No. 14:	Select tray when APS cancel	APS preferential tray/ Tray 1/ Tray 2/ Tray 3/
		Tray 4/ Bypass tray
No. 15: Platen original size detect		Only A series/ Full size/ AB series/ Inch series
No. 16: RADF original size detect		Only A series/ Full size/ AB series/ Inch series
No. 17: Platen orig. size detect (SMALL)		A5R/ B6R/ 5.5"x8.5"R
No. 18:	Rotation	ON-APS/AMS only/ ON-APS/AMS/Reduce only/
		ON-Always
No. 19: Rotation (180 angle)		ON-Always/ According to Rotation OFF tray
No. 20: B6R size original type		Landscape/ Portrait
No. 21: A3, B4, 11x17, 8.5x14, F4 orig. type		Landscape/ Portrait
No. 22: Staple mode reset-function		OFF/ ON
No. 23: Job offset operating		OFF/ ON
No. 24:	Continuation print	OFF/ ON
No. 25: SDF Auto start		OFF/ ON-Memory mode only
No. 26: Key click sound		OFF/ ON
No. 27: 1 SHOT indication time		3 seconds/ 5 seconds
No. 28: Power save screen		Shut off mode/ Low power mode
No. 29: START key latch function		OFF/ ON
No. 30: STOP key function		JOB momentary stop/ JOB cancel
No. 31: Auto select of Booklet copy		Automatic selection/ Non Automatic selection
No. 32:	E.C.M. password	Under 8 digits/ 8 digits
No. 33:	Arrow key change (Image Shift)	Decimal point off (1 STEP 1mm)/ Decimal point
		on (1 STEP 0.1mm)
No. 34: Exit direction of 1 sheet		Face up/ Face down
No. 35:	An interruption suspended way	Division of a number of copies/ During of a
		number of copies

13-40 Key Operator Mode