Safety Information
Routine Safety
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN MACHINE DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY
❒PERIODIC CHECK
Check for loose connection or excessive heat on power plug, damage to power cord and/or plug (creased, frayed, scratched or cut, etc.). Be sure the plug is inserted fully, and ground wire is connected correctly. If any abnormality occurs, do not continue to operate the machine.
❒SERVICE MESSAGES
If a service message displays, turn the machine off, disconnect the power cord from the outlet, and report the condition to your service representative.
❒TONER
Check to be sure toner in storage is out of the reach of children, or anyone incapable of using supplies safely. Although toner is nontoxic, do not inhale toner or allow it to come in contact with eyes. If inhalation or eye contact occurs, immediately consult a physician. Please refer to the appropriate material safety data sheet for additional toner safety information.
❒PAPER
Check paper to be sure it is according to specifications outlined in Section 4.
❒CLEANING MATERIALS
Check the type of cleaning material used on your machine to be sure it is recommended by Konica. If necessary, check with your Konica representative. Never use cleaning materials for purposes other than cleaning, and be sure to keep all cleaning materials out of the reach of children or anyone who is incapable of using them safely.
❒POWER SAVER
Use Power Saver mode for short periods of machine inactivity. When not using the machine for long periods of time, turn power off, except when the weekly timer function is operating.
❒DISPOSAL OF THE COPIER
