Konica Minolta 7075 manual Finished Sets

Basic Operations

Using the Multi-Sheet Bypass Tray (continued)

Load offset tabbed sheets so that the tab extensions are on the right at the rear (not front) of the tray. The top sheet is designated face up as the first tab of the finished set. Subsequent offset tab sheets follow in sequence.

When loading tabbed sheets in the Multi-sheet bypass tray, be sure to specify the paper type as TAB on the Paper Type/Size Setting Screen; otherwise mishandled paper may occur. See p. 6-19 to p. 6-21.

Example: 3 Tabbed sheets loaded in position for one finished set.

			1st TAB
Rear	1st TAB	Section 1	2nd TAB
Section 1	2nd TAB	Introduction
Introduction	3rd TAB
Printed
side			3rd TAB

Front

ONE FINISHED SET

Example: 9 Tabbed sheets loaded in position for 3 finished sets.

Rear

Front

Section 1

Introducttion

Printed side

1st TABS 2nd TABS 3rd TABS

1st TAB

Section 1

Introduction

2nd TAB

Section 1	Section 1
Introduction	Introduction

3rd TAB

3 FINISHED SETS

Basic Operations 6-43